Walk-In Shower Glass Panel 100×200 cm | 10mm Tempered Glass | Black Matte Trim

This Walk-In Shower Glass Panel (100 × 200 cm) is designed to deliver a clean, open, and contemporary shower experience. Made from 10mm clear tempered safety glass, it ensures superior strength, safety, and durability.

The black matte stainless steel trim adds a bold modern touch while offering excellent resistance to rust and moisture. The wall-mounted installation with an adjustable top support rod allows flexible fitting and ensures long-term stability. Ideal for both residential and commercial bathroom spaces, this fixed glass panel complements modern interior designs.

🛠️ Installation Instructions

Important: Installation should be carried out by a qualified installer to ensure safety and proper fitting.

Pre-Installation Checklist

• Ensure wall and floor surfaces are level, plumb, and fully tiled

• Wall must be solid concrete or reinforced masonry

• Confirm installation side (left or right) before drilling

• Use suitable bathroom-grade wall anchors and screws

• Do not install on uneven or weak walls

---

Step-by-Step Installation

Step 1: Marking & Alignment

• Mark the wall position for the glass panel

• Use a spirit level to ensure vertical alignment

Step 2: Wall Profile Installation

• Drill holes as marked and insert wall anchors

• Fix the black matte wall profile securely to the wall

• Double-check vertical alignment

Step 3: Glass Panel Placement

• Carefully insert the 10 mm tempered glass panel into the wall profile

• Use rubber gaskets to protect the glass edges

• Adjust glass position as required

Step 4: Top Support Rod Installation

• Fix the wall end of the adjustable top support rod

• Attach the glass clamp to the panel

• Adjust the rod length to achieve firm support

Step 5: Final Fixing & Sealing

• Tighten all screws and fittings securely

• Apply clear silicone sealant along wall joints if required

• Allow sealant to cure before use

---

Installation Safety Notes

• Handle glass with protective gloves

• Do not place glass directly on hard surfaces

• Never cut, drill, or modify tempered glass

• Avoid overtightening clamps to prevent glass stress

---

🧼 Care & Maintenance Instructions

Daily / Regular Cleaning

• Clean with mild soap and warm water

• Use a soft cloth or sponge

• Dry glass after use to reduce water spots

What to Avoid

• Abrasive pads or scouring cleaners

• Acidic or ammonia-based chemicals

• Metal scrapers or sharp tools on glass or trim

Trim & Hardware Care

• Wipe black matte trim with a soft damp cloth

• Do not use polish or wax on matte surfaces

• Periodically check support rod and fittings for tightness